Manual Surface grinder GM150&GM200
Bayani
| Bayani | Naúrar | Ƙayyadaddun bayanai | |
| Abu NO. |
| 121010 | 121015 |
| Samfura |
| GM 150 | GM 200 |
| Teburin aiki |
| ||
| Girman Tabel (tsawon * nisa) | mm | 460*180 | 480*200 |
| Matsakaicin tafiya na tebur (tsawon * nisa) | mm | 500*190 | 530*220 |
| T-slot na tebur (lamba * nisa) | mm | 1*14 | 1*14 |
| Nika kai |
|
| |
| Nisa daga cibiyar spindle zuwa tebur mai aiki | mm | 335 | 450 |
| Girman dabaran niƙa(WA46*5V)(OD*Nisa*ID) | mm | 200*13*31.75 | |
| Gudun dabaran niƙa 50hz | r/min | 2850 | |
| Gudun dabaran niƙa 60hz | r/min | 3440 | |
| A tsaye (sama da ƙasa) ciyar da wheel wheel |
|
| |
| ta REV. wheel wheel | mm | 1.25 | |
| kowane DIV. wheel wheel | mm | 0.005 | |
| Ketare (gaba da baya) ciyar da abin hannu |
|
| |
| ta REV. wheel wheel | mm | 5 | |
| kowane DIV. wheel wheel | mm | 0.02 | |
| Ƙarfin motar |
|
| |
| Injin leda | kw | 1.5 | |
| Motar sanyi | w | 40 | |
| Daidaitaccen aiki |
|
| |
| Daidaituwar saman injin da aka sarrafa zuwa saman tushe | mm | 300: 0.004 | |
| Ƙunƙarar saman | μm | Rana 0.32 | |
| Nauyin net/Girman nauyi | kg | 650/750 | 750/850 |
| Girman tsinken maganadisu na dindindin (na zaɓi) | mm | 400*150 | 400*200 |
| Gabaɗaya girma (L*W*H) | mm | 1550*1150*1590 | 1680*1140*1760 |
| Girman akwati (L*W*H) | mm | 1000*1150*1760 | 1140*1250*1940 |
Standard Na'urorin haɗi
| Dabarun | 1 pc |
| Dabarun ma'auni | 1 pc |
| Saitin ɗagawa | 4 guda |
| Biri spaner | 1 pc |
| Dabarar dabara | 1 pc |
| Mai saka wuka | 1pc |
| Level wedge da dunƙule | 1 saiti |
| Akwatin kayan aiki da maƙarƙashiya na musamman | 1 saiti |
| I fitilar haske | 1 saiti |
| Na'urorin haɗi na zaɓi | |
| Magnet Chuck na dindindin | 1 saiti |
| Mai tara kura | 1 saiti |
| Dabarun ma'auni tsayawar | 1 saiti |
| Kayan aikin sanyaya da ƙura | 1 saiti |
